Für unseren Standort Nürnberg suchen wir zu Oktober 2024 einen Werkstudenten (m/w/divers) für mindestens 6 Monate und 20 Stunden pro Woche.

In der heutigen Automobilwelt sind Telematiksteuergeräte (kurz TCU’s) nicht mehr weg zu denken. Diese Steuergeräte vernetzen Fahrzeuge mit der Umwelt und erhöhen die Effizienz, Sicherheit und den Komfort. Sie bieten eine breite Palette an Funktionalitäten, wie Over-the-Air-Updates, Connected Services, Remote Diagnose und eCall. Sie sind Teil eines agilen Entwicklerteams und arbeiten innerhalb des komplexen Hard und Softwaresystems einer TCU an neuen Funktionen.

Deine Aufgaben

• Weiterentwicklung eines Demonstrators zur Präsentation von Next Generation eCall
• Entwicklung & Pflege von Software
• Entwicklung und Durchführung von Software- und Integrations-Tests
• Unterstützung bei Dokumentation von bereits vorhandenen Features
• Mitgestaltung bei der Erstellung von Marketingmaterial

Dein Profil

• Studierende im Bereich Elektrotechnik, Informatik, Mechatronik oder vergleichbare Qualifikation
• Erfahrung in der Nutzung von Linux
• Sicherer Umgang mit einer objektorientierten Programmiersprache, wie C++
• Fundierte Kenntnisse im Umgang mit MS Office
• Sehr gute Deutsch- und Englischkenntnisse in Wort und Schrift
• Eigeninitiative, Selbstständigkeit und analytisches Denken
• Hohes Maß an Engagement, Kreativität sowie Lern- und Leistungsbereitschaft

Bitte denke daran, Deine aktuelle Immatrikulationsbescheinigung ebenso wie Deinen aktuellen Notenspiegel und einen Auszug aus der aktuellen Studienordnung hinsichtlich der Abschlussarbeit hochzuladen, da diese für die Bearbeitung Deiner Bewerbung zwingend erforderlich sind. Bitte reiche uns, sofern erforderlich, Deinen gültigen Aufenthaltstitel sowie Deine Arbeitsgenehmigung inklusive Zusatzblatt ein.

Die Bewerbungen von schwerbehinderten Menschen sind willkommen.

Unser Angebot

• Angenehmes Arbeitsklima und eine von fachlicher und persönlicher Wertschätzung geprägte Arbeitsatmosphäre
• Weitreichende Gestaltungsmöglichkeiten und selbstständiges Arbeiten in einem durch flache Hierarchien geprägten und internationalem Arbeitsumfeld
• Dynamisches Team mit tollem Teamspirit

Du willst mit uns Gas geben? Starte durch und bewirb dich jetzt!

Ready to drive with Continental? Take the first step and fill in the online application.

Interested?

Apply now!

We Generate Technical Solutions
Pragmatic. Versatile. Responsive

Für unseren Standort Nürnberg suchen wir zu Oktober 2024 einen Werkstudenten (m/w/divers) für mindestens 6 Monate und 20 Stunden pro Woche.

In der heutigen Automobilwelt sind Telematiksteuergeräte (kurz TCU’s) nicht mehr weg zu denken. Diese Steuergeräte vernetzen Fahrzeuge mit der Umwelt und erhöhen die Effizienz, Sicherheit und den Komfort. Sie bieten eine breite Palette an Funktionalitäten, wie Over-the-Air-Updates, Connected Services, Remote Diagnose und eCall.

Deine Aufgaben

• Integration eines OTA-Masters für Telematik Einheiten
• Unterstützung bei der Erarbeitung des Systemansatzes mit Fokus auf den Interfaces zu weiteren Steuergeräten
• Entwicklung und Durchführung von System/Software- und Integrations - Tests
• Unterstützung bei Dokumentation von bereits vorhandenen Features
• Mitgestaltung bei der Erstellung von Marketingmaterial

Dein Profil

• Studierende im Bereich Elektrotechnik, Informatik, Mechatronik oder vergleichbare Qualifikation
• Erfahrung in der Nutzung von Linux
• Sicherer Umgang mit einer objektorientierten Programmiersprache, wie C++
• Fundierte Kenntnisse im Umgang mit MS Office
• Sehr gute Deutsch- und Englischkenntnisse in Wort und Schrift
• Eigeninitiative, Selbstständigkeit und analytisches Denken
• Hohes Maß an Engagement, Kreativität sowie Lern- und Leistungsbereitschaft

Bitte denke daran, Deine aktuelle Immatrikulationsbescheinigung ebenso wie Deinen aktuellen Notenspiegel und einen Auszug aus der aktuellen Studienordnung hinsichtlich der Abschlussarbeit hochzuladen, da diese für die Bearbeitung Deiner Bewerbung zwingend erforderlich sind. Bitte reiche uns, sofern erforderlich, Deinen gültigen Aufenthaltstitel sowie Deine Arbeitsgenehmigung inklusive Zusatzblatt ein.

Die Bewerbungen von schwerbehinderten Menschen sind willkommen.

Unser Angebot

• Angenehmes Arbeitsklima und eine von fachlicher und persönlicher Wertschätzung geprägte Arbeitsatmosphäre
• Weitreichende Gestaltungsmöglichkeiten und selbstständiges Arbeiten in einem durch flache Hierarchien geprägten und internationalem Arbeitsumfeld
• Dynamisches Team mit tollem Teamspirit

Du willst mit uns Gas geben? Starte durch und bewirb dich jetzt!

Ready to drive with Continental? Take the first step and fill in the online application.

Interested?

Apply now!

We Generate Technical Solutions
Pragmatic. Versatile. Responsive

Für unseren Standort Nürnberg suchen wir zu Oktober 2024 einen Werkstudenten (m/w/divers) für mindestens 6 Monate und 20 Stunden pro Woche.

In der heutigen Automobilwelt sind Infotainment Systeme zentrale Teile für die User Experience. Infotainmentsysteme basieren auf hoch komplexen und überaus leistungsfähigen SoCs. Regelmäßig bringen die Hersteller der SoCs neue Generationen auf den Markt. Ein solch neuer SoC soll evaluiert werden. Sie sind Teil eines agilen Entwicklerteams und arbeiten innerhalb des komplexen Hard und Softwaresystems einer Infotainment ECU an neuen Funktionen.

Deine Aufgaben

• Evaluation eines neuen Infotainment SoC
• Portierung einzelnen Funktionalitäten auf neuem SoC
• Entwicklung neuer Funktionalitäten auf dem neuen SoC
• Entwicklung und Durchführung von System/SW und Integrations-Tests
• Unterstützung bei Dokumentation von neuen und bereits vorhandenen Features
• Mitgestaltung bei der Erstellung von Marketingmaterial

Dein Profil

• Studierende im Bereich Elektrotechnik, Informatik, Mechatronik oder vergleichbare Qualifikation
• Erfahrung in der Nutzung von Linux
• Sicherer Umgang mit einer objektorientierten Programmiersprache, wie C++, sowie Android
• Fundierte Kenntnisse im Umgang mit MS Office
• Sehr gute Deutsch- und Englischkenntnisse in Wort und Schrift
• Eigeninitiative, Selbstständigkeit und analytisches Denken
• Hohes Maß an Engagement, Kreativität sowie Lern- und Leistungsbereitschaft

Bitte denke daran, Deine aktuelle Immatrikulationsbescheinigung ebenso wie Deinen aktuellen Notenspiegel und einen Auszug aus der aktuellen Studienordnung hinsichtlich der Abschlussarbeit hochzuladen, da diese für die Bearbeitung Deiner Bewerbung zwingend erforderlich sind. Bitte reiche uns, sofern erforderlich, Deinen gültigen Aufenthaltstitel sowie Deine Arbeitsgenehmigung inklusive Zusatzblatt ein.

Die Bewerbungen von schwerbehinderten Menschen sind willkommen.

Unser Angebot

• Angenehmes Arbeitsklima und eine von fachlicher und persönlicher Wertschätzung geprägte Arbeitsatmosphäre
• Weitreichende Gestaltungsmöglichkeiten und selbstständiges Arbeiten in einem durch flache Hierarchien geprägten und internationalem Arbeitsumfeld
• Dynamisches Team mit tollem Teamspirit

Du willst mit uns Gas geben? Starte durch und bewirb dich jetzt!

Ready to drive with Continental? Take the first step and fill in the online application.

Interested?

Apply now!

We Generate Technical Solutions
Pragmatic. Versatile. Responsive

For our growing Continental Engineering Services - Interior team we are looking for a Hardware Engineer.

Continental Engineering Services (CES) is active worldwide as an independently operating provider of comprehensive engineering services. The segment "Interior Functions" develops embedded system solutions for all interior functions in all kinds of vehicles. 

We develop by integration of existing components stable and fast solutions for use in small series and special vehicles. We are always seeking useful applications beyond the automotive area and also offer a range of conceptual and feasibility studies.

Our portfolio of innovative products offers flexible and customization solutions across the automotive and non-automotive markets.

Your Tasks

• Concept definition using latest technologies;
• Designing hardware architecture to meet the customer requirements;
• Providing solutions together with our suppliers to fulfill customer demands;
• Designing, calculating and simulating hardware schematics;
• Documenting the hardware design respecting the development process;
• Cooperating with an international development team, customers and suppliers.

A mentor will support you to stepwise take over own responsibility after an initial training phase which will familiarize you with our products, tools, processes and organization.

Your Profile

• University Degree (Electronics, Computer science or equivalent);
• Good knowledge in analog and digital electronic design;
• Good understanding of automotive architectures / systems;
• Good knowledge in schematic design;
• Knowledge of electronics measuring and test equipment;
• Advanced English – speaking and writing level;
• To be passionate about electronics and hardware in general;
• Initiative and result orientation.

It is an advantage

• Previous experience in hardware development;
• Knowledge in PCB Layout design;
• Ability to plan and coordinate development activities;
• Experience with Zuken;
• German Language.

What we offer

Pay for Performance:

• Achievement Bonuses and Rewards;
• Relocation Bonus for non-Timisoara Residents;
• Recommendation Bonuses for new team members;
• Flexibility Program including flexible hours, mobile work and sabbaticals

Wellbeing:

• Health & Wellness (Private Health Insurance, Life Insurance, Sport activities etc.);
• Different discounts (glasses, tires, medical, shopping);
• In-house restaurant & coffee corners.

Life-Long Learning:

• Technical, Soft Skills & Leadership trainings;
• Dedicated Programs and Conferences;
• Free Language Courses (English, German, French etc);
• Access to e-learning platforms;
• Career development opportunities (local and international);
• Internal development communities (Experts, Agile Community of Practice, Artificial Intelligence etc).

We want our employees to do well with us. That’s why we offer them not only an exciting job in an international technology group, but also numerous additional offers such as flexible and hybrid working, sabbaticals and other benefits.

Ready to drive with CES? Take the first step and fill in the online application.

Interested?

Apply now!

Your partner for future mobility!

We are looking for a proactive strategic leader to develop the Chassis & Brake Systems Segment within the UK market. The role will focus on business development working towards the creation of a robust and scalable strategy for the segment. This position will be based out of our Lichfield office, with some UK travel required. 

Your Tasks

• Lead the activities of Chassis & Brake Systems Segment in the UK market, aligned to the overall Global and UK Segment strategy, leveraging customer and market insights to help shape the UK strategy and vision.
• Build relationships with the Chassis & Brake Systems Segment Business Centers to determine current and future technologies and services that can be offered to customers.
• Work closely with the UK leadership, Sales and Project Management teams to identify and analyse new and existing customers, including company size, financial stability, key technologies, etc. within the UK market and develop appropriate engagement strategies.
• Ensure customer awareness of the competencies, experience and portfolio offered by the Chassis and Brakes Segment and the wider CES, both locally and globally.
• Initiate and maintain relationships with new and existing stakeholders to ensure that opportunities are brought to the business and deliver clear, concise information to both internal and external teams.
• Support the quote management process, ensuring accurate, timely and competitive responses to customer requests.

Your Profile

• Previous experience within Business Development and/or Engineering in Automotive and Chassis related mechatronic applications
• Good technical knowledge of Chassis and Brake Systems/Controls would be advantageous
• Entrepreneurial capabilities and Interest
• Ability to motivate people and build strong working connections
• Strong customer focus and attention to detail
• Good knowledge of Microsoft 365 tools
• Experience in Project Management would be advantageous
• Full UK driving license required 

Diversity creates value for a better tomorrow. We offer equal opportunities to everyone - regardless of age, gender, nationality, cultural background, disability, religion, ideology or sexual orientation.

Our offer

• 25 days holiday plus statutory holidays
• Private Medical Insurance
• Company Pension scheme
• Discount on tyres
• Training Opportunities
• Modern working environment and flexible working practices

Do you want to hear more from our team?

https://conti-engineering.com/wp-content/uploads/2022/11/Jobs_Douglas_Burgess-Hill_UK.mp4https://conti-engineering.com/wp-content/uploads/2022/11/Jobs_Farrah_HUD-Engineer_Burgess-Hill_UK.mp4

Interested?

Apply now!

We Generate Technical Solutions
Pragmatic. Versatile. Responsive

We are looking for you as a Senior Business Development Manager Chassis & Brake Systems (m/f/diverse) to support our area Continental Engineering Services (CES) at the location Frankfurt.

Your Tasks

• Coordination of the segment's global business development activities
• Ownership of our Business Development KPIs in alignment with the Segment Director
• Strategic expansion of the customer and product portfolio of the CES Chassis & Brake Systems segment
• Presentation of products and services to potential customers
• Preparation of market and customer analyses for the evaluation of new business areas
• Development of marketing core messages in cooperation with central marketing
• Interface to central marketing in the creation of marketing material
• Creation of presentations in cooperation with marketing and sales
• Organization and implementation of Tech Days at the customer's site, participation in trade fairs and conferences

Your Profile

• Academic degree in industrial engineering, electrical engineering, other technical courses of study or comparable qualification
• Several years of professional experience in product development in the automotive environment
• Experience in social media and marketing would be an advantage
• Very good handling of the MS Office programs
• Very good German and English language skills (both written and spoken)
• Enjoyment of independent work
• High level of commitment and customer orientation
• Above-average teamwork, organizational and communication skills
• Willingness to travel (approx. 20 - 30%)

Diversity creates value for a better tomorrow. We offer equal opportunities to everyone - regardless of age, gender, nationality, cultural background, disability, religion, ideology or sexual orientation.

What we offer

• Exciting and diversified projects
• Collegial environment
• An inside in innovative technologies of the automotive industry
• Wide network to research and development parties
• Big amount of self-reliance
• Modern leadership culture
• Individual choice of working times and locations
• Promotion of personal development
• Individual professional education
• Participation to the company’s success

Do you want to hear more from our team?

https://conti-engineering.com/wp-content/uploads/2022/11/Jobs_Douglas_Burgess-Hill_UK.mp4https://conti-engineering.com/wp-content/uploads/2022/11/Jobs_Farrah_HUD-Engineer_Burgess-Hill_UK.mp4

Interested?

Apply now!

We Generate Technical Solutions
Pragmatic. Versatile. Responsive

For the Business Area Network Functions within Continental Engineering Services, we are looking for a Technical Project Manager for Embedded Software (m/f/diverse) as soon as possible.

With a service portfolio that includes development, product supply, integration, and consulting as well as core competencies and specialist engineering in driver assistance, interior electronic functions, driveline & electrification and brake systems, CES is the ideal engineering and production partner for solving technical challenges within the automotive and industrial sectors.

In this position you are responsible for the technical support and implementation of exciting development projects for customers in the start-up or OEM sector.

Your Tasks

• Coordination of projects in the field of embedded software development for high-performance computers, gateways, and switches.
• Technical management and control of an international software project team
• Planning of the software development
• Definition of measures to ensure compliance with planning and communication interface with internal and external project participants
• Creation and maintenance of project documentation (e.g. software development plan, software safety plan, software release documentation, status reports, etc.)
• Support of the overall project manager, deadline tracking, status meetings

Your Profile

• Completed degree in engineering, electrical engineering, IT, or a comparable field of study
• Professional experience in software development
• Experience in project management methods and tools
• Ability to formulate and visualize technical content concisely and comprehensibly
• Very good knowledge of spoken and written German and English
• Problem-solving ability, customer orientation and independent working methods
• Confident demeanor and good communication skills

Diversity creates value for a better tomorrow. We offer equal opportunities to everyone - regardless of age, gender, nationality, cultural background, disability, religion, ideology or sexual orientation.

What we offer

• Independent work and the freedom to try things out and develop solutions independently
• Varied and challenging projects, among others from the automotive premium segment
• The opportunity to work in an innovative, dynamic and future-oriented environment
• A wide range of training and development opportunities at all hierarchical levels
• The stability and variety of an internationally oriented company
• A modern and flexible work schedule including the possibility of mobile work
• A working atmosphere characterized by professional and personal recognition
• Well-equipped office space with free access to fruit and beverages as well as a company pension plan
• Flat hierarchies, direct communication and approachability

We want our employees to do well with us. That's why we offer them not only an exciting job in an international technology group, but also numerous additional offers such as flexible and hybrid working, sabbaticals and other benefits.

Ready to drive with CES? Take the first step and fill in the online application.

For more information about our location, see our image video below: Link.

Interested?

Apply now!

Your partner for future mobility

As Testing Bench Manager & Test Engineer, you define and agree with the stakeholders (Customer and Continental) all the project system related requirements ensuring full understanding, development coverage and traceability according to Customer and continental processes and tools.

He/she Is responsible for developing testbenchs, analyze test specifications, execute test, and evaluating tests results; all in order to verify that the system fulfils the allocated requirements (Internal and Customer related).

Requirements and Test bench Manager has to follow:

• Requirement management, processes and tools
• SiL  (Software in the Loop): Test of functionality of single software components or the complete software system
• HiL (Hardware in the Loop): Test of functionality of the complete software focusing on the interaction between software and hardware.
• Vehicle Modelling, Systems modelling in order to guarantee the Close loop testing (As on a real vehicle)
• Vehicle Modelling Validation

Your Tasks

• Develop, enhance and maintain test tools & Tests Bench according to Project and Stakeholders needs
• Define/Develop/consolidate test environments (SIL, HIL, VEH)
• Create passive vehicle models
• Create Active vehicle models: modelling all the vehicle components/nodes (into virtual ECU and actuators) interfacing with the HW under tests to create a Bench test environment closed loop representing the real vehicle
• Create and maintain a methodology to update vehicle models according to the project requirements emission/Status (Active Vehicle) and according to the passive vehicle development status
• Validate vehicle models (Active and passive)
• Ensure the Maintenance of the Benches needed (HIL, SIL, Customer Bench) according to stakeholders needs
• Bus communication set-up between model signals and ECU or between two different ECUs (the ECUs could be either physical or simulated depending on the system requirements);
• CarMaker scenarios definition and/or adaption depending on desired requirements.
• to support in the fault injection plan and proper signal communication.
• SW development such as HMI: such as on vehicle including dashboard, Key Status (or Ignition Working Condition or vehicle state handling), maneuvers definition, Automatic failure generation set up, Vehicle BUS definition as easy as possible (Example staring from dbc files)
• Support to create a flexible architecture to ensure the SIL/MIL/HIL closed loop simulation on OEM & Conti Test benches.
• Test Cases according to Customer & Internal Continental needs for reaching a full test scope
• Test Automation when feasible
• Data collecting / Failure analysis/ reports generation
• Establish Test Management Board (TMB)
• Monitoring of release test activities, support deviation.
• Review test results and monitoring of action items.
• Develop a project specific test strategy
• Define test activities & schedule (TPS)
• Support and establish customer specific test
• Responsible for test related customer Communication, FlashLoader, Network Management, Transport Protocol, Physical Layer & Diagnostic
• Create release recommendation
• Coordinate and align test strategy, test benches, test tools cross locations

ADDITIONAL RESONSIBILITIES & SUPORT:

• Support of different requirements engineers for the correct requirements analysis, interpretation, and internal requirement translation for the developers
• Define a requirement implementation timing and traceability
• Manage the requirements changes request and requirements release packages.

QUALITY & STAKEHOLDER'S SATISFACTION:

• Ensure Quality in all the related responsibility, Processes according to Continental &  Customer requirements
• Customer & CES/Continental Interfaces
• Interface with other department personnel in resolution of development issues from above (System, SW, Architecture, …)
• Establish Lessons learned process & feedback culture within the Conti & OEM interfaces
• Active steering. Agree and steer new request with Customer Engineers, find a win-win solution
• Continuous improvement: improve customer perception through excellence in customer interaction. Capability to increase information flow & understanding between customer and Continental Teams

 

Your Profile

REQUIRED KNOWLEDGE & SKILLS:

• Graduated with Master engineering university on Electronic, Informatics, Electrical, Mechatronics, Automation
• Expert Designer knowledge on HIL Test Bench, including HW, SW and tests case (IPG, Vector, NI)
• High Knowledge on CARMAker / IPG SW & Tools
• Expert of Diagnostic, BUS (Message Map, Network Management, Transport protocol), FlashLoader, FSF, Vehicle Functions) à And all the ISO related
• Automotive Software development knowledge
• Experience of analytic testing and trouble shooting in Bench, test environments (HIL, SIL, …) and plant facilities
• Good Experiences with CAN, DIA (ISO), FSF, Vehicle Functions, E&E Architectures
• Good Knowledge for:
  • Matlab, Simulink, C code programming, Rapid prototyping, CANoe (Including CAPL Script generation), Canalyzer (Including CAPL Script generation), Dianalyzer, Office packages, Vector test studio
  • HIL Bench architecture
• Hand over experiences
• Complex system engineering experiences
• Good Knowledge for Vehicle dynamics & Controls
• Good Knowledge on vehicle components and modelling (Active and passive vehicle)
• Good Knowledge on ECU’s and actuators modelling
• Base knowledge on functional safety ISO 26262
• Knowledge of IEC 61508 or SPiCE processes
• Valid Driving License (Min B) and good driving skills

LANGUAGES:

• English à Fluent
• Italian à Mother Language
• German à Desired

SOFT SKILLS:

• Good team worker, problem solving oriented, flexibility, ability to take good decisions (win-win) quickly.
• Good international social skills and drive-force to get the required support from all the responsible persons within Conti and OEM requirements and testing departments to solve the issues, with quality, on time.
• Authority to lead/Steer meetings (@ Continental and Customer) discussing issues and their solutions.
• Good Leading skills
• Excellent communication skills.
• Continue improvement & motivation for knowledge increase
• Proactive behaviour

Interested?

Apply now!

We Generate Technical Solutions
Pragmatic. Versatile. Responsive

The system integration requirement, test and control function application engineer is an hybrid engineer able to work across the development V cycle. He/She has a wide ranges of technical knowledge.

He/She is responsible for the correct Electronic Brake Systems Function development, Application and test on the Benches & vehicle. She/He is able to manage requirement analysis, Feature development, rapid prototyping,  HIL/vehicle testing and control functions application and development.

Manage the SensePlanAct Customer requirements related to the driving and assistance control functions.

Ensure quality and software releases according to the Continental and OEM processes.

Interface internally (with other team) and externally (OEM) for a successful control function implementation on Project.

Your Tasks

• Control Function Development and Integration Engineer (Development according to ISO 26262 and SE / Automotive Process)
• Control function Requirements Engineer
• Simulation with MATLAB / Simulink - Model Base Design (When needed/requested), rapid prototyping
• Development of control algorithms (When needed/requested)
• Creation and maintenance of the functional architecture
• Evaluation and definition of the interfaces between the components
• Create requirements specification for the System (HW components & Interfaces), Software, Vehicle Interfaces
• Consolidate internal functional and safety requirements
• Create and adapt functional safety concepts
• Create prototype software for vehicle functions in C programming language (When needed/requested)
• Implementation, application and testing of the developed functional components
• Handling the requirements analysis according to internal processes
• Drive/Steer the control functions related topics in your project
• Plan the function and maturity relevant project milestones & timing with the project team
• Coordinate and track project milestones and schedule to ensure achievement of goals
• Ensure the implementation, verification, and validation of all functional requirements in the project
• Plan and execute function and application testing on vehicle and HIL/SIL
• Support for the handling of test equipment and maintenance of test vehicles and needed test tools
• Control Functions improvement (or new development) based on any research project (model Base Design, C Code, Rapid prototyping, …)
• Interface with other department personnel in resolution of development issues from above (System, SW, Architecture, …)
• Collaborate cross BU when our system has a multiple interface with other Continental system on vehicle or for Advanced/Innovation projects
• Interface to customer (OEM) for all function related issues of your project
• Active steering. Agree and steer new request with Stellantis Engineers, find a win-win solution
• Continuous improvement: improve customer perception through excellence in customer interaction. Capability to increase information flow & understanding between customer and Continental Teams

ADDITIONAL RESPONSIBILITIES & SUPPORT:

• to support in vehicle model development and/or refinement
• to support in the logic implementation in case of virtual ECUs (proper signals identification, reference system and units);
• VF Implementation & Verification support
• bus communication set-up between model signals and ECU or between two different ECUs (the ECUs could be either physical or simulated depending on the system requirements);
• CarMaker scenarios definition and/or adaption depending on desired requirements.
• Support to create a flexible architecture to ensure the SIL/MIL/HIL closed loop simulation on OEM & Conti Test benches.
• Test cases definition according to customer & Internal continental needs
• Test automation when feasible
• Data collecting / Failure analysis/ reports generation

QUALITY & STAKEHOLDER'S SATISFACTIONS:

• Ensure Quality in all the related responsibility, processes according to continental &  customer requirements
• Customer & CES/Continental Interfaces
• Establish Lessons learned process & feedback culture within the Conti & OEM interfaces

Your Profile

REQUIRED KNOWLEDGE & SKILLS:

• Graduated with master thesis on one of the following engineering fileds: Mechanics, Electronic, Informatics, Electrical, Mechatronics, Automation, Aerospace or equivalent (to be evaluated)
• Good Knowledge on Automotive Software development for control functions modelling

• Good Knowledge on Functional Safety ISO 26262
• Good Designer knowledge on of HIL Test Bench, including HW, SW and tests case
• Good Knowledge on CARMAker / IPG SW & Tools
• Good Knowledge of Diagnostic, BUS (Message Map, Network Management, Transport protocol), FlashLoader, Cyber Security, Autosar, FSF, Vehicle Functions)
• Experience of analytic testing and trouble shooting in Bench, test environments (HIL, SIL, …) and plant facilities
• Experiences with CAN, DIA (ISO), FSF, Vehicle Functions, E&E Architectures
• Good Knowledge for:
  • Matlab, Simulink, C code programming, Rapid prototyping, CANoe (Including CAPL Script generation), Canalyzer (Including CAPL Script generation), Dianalyzer, Office packages, Automotive Linux
  • HIL Bench architecture
• Hand over experiences
• Complex system engineering experiences
• Knowledge of IEC 61508 or SPiCE processes (level 3 target)
• Desired a good knowledge on vehicle, vehicle components, vehicle dynamic,
• Knowledge on ESC/ABS, ADAS Components: Camera & Radar
• Knowledge on HAD (Autonomous driving features)

LANGUAGES:

• English à Fluent
• Italian à Mother Language
• German à Desired

SOFT SKILLS:

• Good team worker, problem solving oriented, flexibility, ability to take good decisions (win-win) quickly.
• Good international social skills and drive-force to get the required support from all the responsible persons within Conti and OEM requirements and testing departments to solve the issues, with quality, on time.
• Authority to lead/steer meetings (@ Continental and Customer) discussing issues and their solutions.
• Excellent communication skills.
• Continue improvement & motivation for knowledge increase.
• Proactive behavior.
• Team player with strong focus on final target
• Self-dependent with a high degree of passion, dedication, and commitment
• Ability to travel frequently, no blocking points
• Big passion on vehicle particularly on vehicle SensPlanAct controls
• Excellent performances in learning new tools, new technologies and development process
• Ability in summarizing succinctly and precisely
• Driving License B
• Good Driving Skills

Interested?

Apply now!

We Generate Technical Solutions
Pragmatic. Versatile. Responsive

As a Sales Trainee within CES, you will start your career path in our Region Italy Sales-Team, supporting Italian Customer acquisitions. After a training period, you will be given direct responsibility for a limited number of Customers, and will continue work and be supported by the Sales-Team.

Your Tasks

• Italian Customer Liaison working in multidisciplinary European Teams for RFI/RFQ replies, managing Purchase Orders, aligning Terms & Conditions and Non-Disclosure Agreements
• Promote Stakeholder communication and “Customer Relationship Management”
• Support presentation of products and new developments to existing and potential customers
• Liaison with local and German teams, disciplines (Business Development, Engineering, Project Management, Marketing & A/R)
• Sales planning and market analysis
• Strong support of local events (Techdays, customer workshops, etc)
• Pioneering and building new business opportunities

Your Profile

• Completed Degree Level in Engineering, Economics or a comparable qualification (automotive electronics preferred as main or sub topic)
• Excellent Communication skills
• Willingness to work with new contacts, customers
• High degree of Motivation and self-responsibility in day-to-day tasks
• Good written and spoken Italian and English (German is a bonus)
• Initiative, analytical skills and quick to learn
• Willingness to travel

Interested?

Apply now!

We Generate Technical Solutions
Pragmatic. Versatile. Responsive

Für unseren Standort Ingolstadt suchen wir ab Oktober 2022 einen Pflichtpraktikanten (m/w/divers) für mindestens 18 Wochen.

Ihre Aufgaben 

• Konstruktive Arbeiten im Interior-Umfeld
• 3D-Modellierung und Zeichnungserstellung
• Analysen und Recherchen
• Musteraufbau und Gerätetests
• Erstellung von Präsentation und Stücklisten in Excel
• Fehleranalysen

Ihr Profil

• Student (m/w/divers) im Bereich Maschinenbau, Fahrzeugtechnik, Mechatronik oder vergleichbare Studiengänge
• Praktische Erfahrung mit CATIA V5
• Sicherer Umgang mit den MS Office-Programmen
• Sehr gute Deutsch- und Englischkenntnisse in Wort und Schrift
• Interesse an neuen Themen und Technologien
• Hohe Einsatzbereitschaft, Flexibilität, Kreativität
• Eigeninitiative, Team-, Organisations- und Kommunikationsfähigkeit

Bitte denken Sie daran, Ihre aktuelle Immatrikulationsbescheinigung ebenso wie Ihren aktuellen Notenspiegel und einen Auszug aus der aktuellen Studienordnung hinsichtlich Ableistung eines Pflichtpraktikums hochzuladen, da diese für die Bearbeitung Ihrer Bewerbung zwingend erforderlich sind.

Die Bewerbungen von schwerbehinderten Menschen sind willkommen.

Unser Angebot 

• Angenehmes Arbeitsklima und eine von fachlicher und persönlicher Wertschätzung geprägte Arbeitsatmosphäre
• Weitreichende Gestaltungsmöglichkeiten und selbstständiges Arbeiten in einem durch flache Hierarchien geprägten, internationalem Arbeitsumfeld
• Dynamisches Team mit tollem Teamspirit

Interessiert?

Jetzt bewerben!

We Generate Technical Solutions
Pragmatic. Versatile. Responsive

Reporting to the DAAD Radar Team Lead within the UK, the successful candidate will be able to demonstrate proven capability and experience of designing and developing software for high performance embedded systems.

Your Tasks

• Realization of embedded software for microcontrollers using established company design practices and software life cycles in line with the ISO2001:2008 quality system and high integrity design standards
• Provide close coordination of project activities throughout the duration of the project between both the development teams and the customer
• Interpretation of system requirements in collaboration with systems and hardware engineers to generate software requirements using formal methods
• High and low-level problem solving of technical issues, particularly in the domain of automotive radar and ADAS
• Code implementation using C/C++/Python programming languages, assembly language and automatic code generation from modelled environment (e.g. AUTOsar)
• Regular peer reviews of source code & design documentation
• Generation and maintenance of unit tests; Software build system maintenance (script updates)
• Generation and execution of test plans and reports at all levels of the “V” life cycle, including unit/structural tests, integration tests and verification/validation tests
• Generation, maintenance and formal review of technical documentation
  Active participation in regular project and team meetings
• Responsibility and ownership of ADAS product elements (e.g. software components, tooling topics) and/or technical project team roles (Function Owner, Component Owner, etc...T

Your Profile

• Degree-qualified in an appropriate science or engineering discipline
• Minimum of 2 years’ experience in a similar role within an embedded system product development environment
• Experience of programming using C, C++, C# and assembly languages
• Experience in Windows Embedded, Embedded Linux, Visual Studio and Eclipse
• Experience using requirements management and specification tools e.g. DOORS, MKS Integrity
• Experience using configuration management tools e.g. MKS
• Experience with software analysis methodologies and tools e.g. UML, Rhapsody
• Experience with CAN based test tools e.g. CANoe, CANalyser, CANape, PCAN or ValueCAN
• Experience of current ADAS applications e.g. ACC, EBA, LDW, LKA or autonomous vehicles
• Experience of ADAS sensor technologies e.g. Radar, Mono Camera, Stereo Camera, Lidar, Ultrasonic
• Experience of signal processing, image processing, object tracking, classification and fusion algorithms and techniques
• An ability to interpret circuit schematics and understand the basic operation of electronics hardware, especially microprocessor peripheral support circuitry
• Higher levels of hardware competence, especially some experience of high voltage (up to 1kV), high power systems would be advantageous
• Good test and analysis skills
• Good written and verbal communication skills
• Proficiency with standard office tools: Microsoft Word, Excel, PowerPoint etc
• A team player with the ability to work alone unsupervised
• Highly-motivated and capable of working on multiple activities concurrently

What we offer

• Competitive Salary;
• 25 days holiday plus statutory holidays;
• Private Medical Insurance;
• Company Pension scheme;
• Childcare Voucher scheme;
• Discount on tyres;
• Training Opportunities;
• Modern working environment and flexible working practices

Do you want to hear more from our team?

https://conti-engineering.com/wp-content/uploads/2022/11/Jobs_Douglas_Burgess-Hill_UK.mp4https://conti-engineering.com/wp-content/uploads/2022/11/Jobs_Farrah_HUD-Engineer_Burgess-Hill_UK.mp4

Why you should apply

• Competitive Salary
• 25 days holiday plus statutory holidays
• Private Medical Insurance
• Company Pension scheme
• Childcare Voucher scheme
• Discount on tyres
• Training Opportunities
• Modern & flexible working environment
• And more benefits that come with working for a global industry leader!

Interested?

Apply now!

We Generate Technical Solutions
Pragmatic. Versatile. Responsive

We are currently looking for a Test Engineer to join our team at our Burgess Hill office. The successful candidates will have the opportunity to learn from our experienced team of Test Engineers. As well as being a logical thinkers, the Test Engineers should have a passion for creating innovative solutions to complex problems.

Your Tasks

• Testing algorithms for functions based on Camera/RADAR/Ultrasonic sensors/LiDAR
• Developing Test Strategies
• Developing Test Plans
• Vehicle build up for testing and demos
• Testing and validating the developed modules in laboratory and in-car, as well as conducting software module tests

Your Profile

ESSENTIAL:

• Bachelor’s degree in a STEM subject
• Analytic & interdisciplinary thinking with an interest in complex tasks
• Previous testing experience or experience in a similar test based role
• Programming abilities (at least one of C, C++, Python, Matlab/Simulink);
• Fluent in English, both written and verbal

ADVANTAGEOUS QUALIFICATIONS:

• Experience in Vehicle Testing and HiL systems
• Experience in Test Management and Planning in multiple projects
• Experience of technical leadership of a team
• Familiar with configuration management system like PTC (MKS), SVN, GIT
• Experience in ADAS testing
• Practical experience with Vector Tools (CANape, CANalyzer, CANoe, CAPL-Script)

What we offer

• Competitive salary and company bonus scheme
• 23 days holiday plus statutory holidays, extended December shutdown period and holiday buying/selling scheme
• Private Medical Insurance
• Income protection and Life Assurance
• Company Pension scheme
• Enhanced Maternity/Paternity/Adoption policies
• Training Opportunities
• Modern working environment
• Flexible working practices

Do you want to hear more from our team?

https://conti-engineering.com/wp-content/uploads/2022/11/Jobs_Douglas_Burgess-Hill_UK.mp4https://conti-engineering.com/wp-content/uploads/2022/11/Jobs_Farrah_HUD-Engineer_Burgess-Hill_UK.mp4

Interested?

Apply now! We Generate Technical Solutions Pragmatic. Versatile. Responsive